TTCRN-A
TTCRN-A
Product Description
TTCRN-A is an acrylic resin based concrete curing compound that forms a thin film layer on the concrete surface, preventing water loss through evaporation.
Areas of Application
- In industrial buildings and airports for field concretes
- For concrete curing operations on fresh poured concrete and all surface hardening applications
- To facilitate curing where concrete curing is difficult
- In art structures like retaining walls, culverts, etc.
- On concrete roads and irrigation channels
- In residential buildings
Advantages and Features
- Provides a harder and dust-free surface
- Allows savings from continuous watering, wet burlap, etc.
- Provides resistance against freezing
- Reduces the risk of plastic shrinkage cracks
- Does not affect the setting properties of concrete
- Does not contain solvents
Application Details, Recommendations, and Warnings
- TTCRN-A is ready to use and should not be diluted with water. It should be thoroughly shaken before use.
- TTCRN-A concrete curing compound is applied by spraying to create a thin film layer on fresh concrete to prevent rapid water loss. Care should be taken to avoid puddling on the surface. It can also be applied using a roller or brush.
- Protect the concrete surface treated with TTCRN-A from rain until completely dry after application; do not walk on it or place equipment on it. The drying time after application is 1-2 hours (at 20°C).
- The ambient temperature during application should be at least +5°C.
Recommended Application Dosage
Consumption may vary depending on the concrete surface temperature, wind speed, and humidity. The optimum application dosage should be determined through trials on a small area. Generally, 100-200 g/m² of application is sufficient.
Technical Specifications
| Color and Form | White liquid |
| Chemical Origin | Acrylic-based emulsion |
| Density (kg/lt) | 0.99 - 1.03 (at +20°C) |
Equipment Cleaning
Equipment in contact with the product can be cleaned by washing with warm water or brushing.
Packaging and Storage
25 kg drum, 200 kg barrel, 1000 lt IBC tank
When stored correctly between +5°C and +35°C in its original, unopened, undamaged packaging, the product can be used for 12 months from the date of production.
Safety
During use, gloves, protective mask, and goggles should be worn. In case of contact with skin or eyes, rinse thoroughly with plenty of water. Detailed safety information is available in the product's SDS.
Protect from direct sunlight and frost.
TTCRN-A
Product Description
TTCRN-A is an acrylic resin based concrete curing compound that forms a thin film layer on the concrete surface, preventing water loss through evaporation.
Areas of Application
- In industrial buildings and airports for field concretes
- For concrete curing operations on fresh poured concrete and all surface hardening applications
- To facilitate curing where concrete curing is difficult
- In art structures like retaining walls, culverts, etc.
- On concrete roads and irrigation channels
- In residential buildings
Advantages and Features
- Provides a harder and dust-free surface
- Allows savings from continuous watering, wet burlap, etc.
- Provides resistance against freezing
- Reduces the risk of plastic shrinkage cracks
- Does not affect the setting properties of concrete
- Does not contain solvents
Application Details, Recommendations, and Warnings
- TTCRN-A is ready to use and should not be diluted with water. It should be thoroughly shaken before use.
- TTCRN-A concrete curing compound is applied by spraying to create a thin film layer on fresh concrete to prevent rapid water loss. Care should be taken to avoid puddling on the surface. It can also be applied using a roller or brush.
- Protect the concrete surface treated with TTCRN-A from rain until completely dry after application; do not walk on it or place equipment on it. The drying time after application is 1-2 hours (at 20°C).
- The ambient temperature during application should be at least +5°C.
Recommended Application Dosage
Consumption may vary depending on the concrete surface temperature, wind speed, and humidity. The optimum application dosage should be determined through trials on a small area. Generally, 100-200 g/m² of application is sufficient.
Technical Specifications
| Color and Form | White liquid |
| Chemical Origin | Acrylic-based emulsion |
| Density (kg/lt) | 0.99 - 1.03 (at +20°C) |
Equipment Cleaning
Equipment in contact with the product can be cleaned by washing with warm water or brushing.
Packaging and Storage
25 kg drum, 200 kg barrel, 1000 lt IBC tank
When stored correctly between +5°C and +35°C in its original, unopened, undamaged packaging, the product can be used for 12 months from the date of production.
Safety
During use, gloves, protective mask, and goggles should be worn. In case of contact with skin or eyes, rinse thoroughly with plenty of water. Detailed safety information is available in the product's SDS.
Protect from direct sunlight and frost.