TTlimeR
TTlimeR
Air-Entraining Plaster and Mortar Additive Enhancing Workability and Adhesion
Product Description
TTlimeR® is an air-entraining additive for plaster and mortar that enhances workability and adhesion properties, used as a substitute for lime.
Applications- In mortars where partial or complete replacement of lime is desired,
- In coarse and fine plaster mortars produced for plaster applications,
- In coarse plaster mortars used for wall masonry,
- On external surface plasters exposed to frequent freeze-thaw cycles due to temperature fluctuations.
- Improves workability by creating micro voids within the mortar mixture,
- Enhances adhesion to surfaces with its active ingredients,
- Allows for partial or complete reduction of lime content in the mixture as desired,
- Acts as a water-reducing agent, strength enhancer, and adhesion promoter,
- Reduces the risk of plastic shrinkage cracks,
- Provides freeze resistance,
- Does not contain chlorides or harmful substances,
- Does not contain solvents.
- Shake well before use.
- Ensure that the aggregates and mixing water are clean.
- TTlimeR® should be mixed with the mixing water in the recommended proportion. It should not be added directly to the dry mixture.
- Excessive dosage can reduce strength due to varying air-entraining amounts in the cement mixture. The appropriate dosage should be determined through trials.
- The ambient temperature during application should be at least +5°C.
TTlimeR® consumption varies depending on the amount of lime used in the mixture, aggregate properties, and the desired adhesion and workability characteristics.
TTlimeR
Air-Entraining Plaster and Mortar Additive Enhancing Workability and Adhesion
Product Description
TTlimeR® is an air-entraining additive for plaster and mortar that enhances workability and adhesion properties, used as a substitute for lime.
Applications- In mortars where partial or complete replacement of lime is desired,
- In coarse and fine plaster mortars produced for plaster applications,
- In coarse plaster mortars used for wall masonry,
- On external surface plasters exposed to frequent freeze-thaw cycles due to temperature fluctuations.
- Improves workability by creating micro voids within the mortar mixture,
- Enhances adhesion to surfaces with its active ingredients,
- Allows for partial or complete reduction of lime content in the mixture as desired,
- Acts as a water-reducing agent, strength enhancer, and adhesion promoter,
- Reduces the risk of plastic shrinkage cracks,
- Provides freeze resistance,
- Does not contain chlorides or harmful substances,
- Does not contain solvents.
- Shake well before use.
- Ensure that the aggregates and mixing water are clean.
- TTlimeR® should be mixed with the mixing water in the recommended proportion. It should not be added directly to the dry mixture.
- Excessive dosage can reduce strength due to varying air-entraining amounts in the cement mixture. The appropriate dosage should be determined through trials.
- The ambient temperature during application should be at least +5°C.
TTlimeR® consumption varies depending on the amount of lime used in the mixture, aggregate properties, and the desired adhesion and workability characteristics.